Micro pressure regulators offer many mounting options
08 October 2008
The range of automation solutions from Camozzi Pneumatics has expanded again with the introduction of the new Series CLR micro pressure regulators. These regulators are available with 1/8 and 1/4 ports and are ultra lightweight (35g and 50g respectively) due to their reduced dimensions and the techno-polymer banjo.
Series CLR is typically used in-line between a valve and actuator. However, these micro pressure regulators provide the design engineer with many mounting options. With a threaded top part of the body both direct mounting to a valve outlet (1/8 and 1/4 threads) and panel mounting are easily facilitated. Due to the direct mounting option and the fact that these pressure regulators are shaped like flow regulators a space saving solution is ensured.
The pressure is precisely regulated simply by turning the polymer knob with a locking nut available to set the desired output. Outlet pressures range from 0.5 to 10 bar with inlet pressures from 2 to 10 bar.
High flow rates are also exhibited (1/8 = 160Nl/min and 1/4 = 270Nl/min) making Series CLR micro pressure regulators responsive and suitable for a wide range of automation applications.
Contact Details and Archive...