This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

KEB, Lenze and Weidmüller team up for greater energy efficiency

10 May 2023

Industry accounts for 38 percent of energy consumption in Germany. One way to reduce energy consumption and conserve resources is to convert factories from alternating current (AC) to direct current (DC).

Five trainees from KEB Automation, Lenze and Weidmüller have implemented the ‘DC Industry’ concept in a joint project. 
 
The task of Marvin Günter (KEB), Jannis Brand and Felix Heiland (Weidmüller), as well as Moritz Drinkuth and Hannes Schneider (Lenze), was clear: within three weeks, the trainees were to convert a floor-standing drilling machine to DC technology and therefore gain initial experience of the future topic of DC Industry. 

A delighted Thomas Möllerfriedrich, Project Coordinator at Weidmüller commented: "It is so motivating to be able to take part in the future-oriented ‘DC infrastructure’ project at the Weidmüller Academy in Detmold and to see how enthusiastically the trainees implemented the floor-standing drilling machine project with all its ups and downs." 

The trainees entered a completely new territory with the project. Not only did they have to work together as a team, but they also had to be introduced to the new topic of DC networks.

After the status quo analysis, it was time for the conversion planning and procurement, then for the actual conversion and commissioning of the system.

"In a three-week period, we learned how complex projects can become that seemed quite simple to us at the beginning," summarises Marvin Günter, Apprentice Electronics Technician For Devices and Systems at KEB. 

The team built a mobile energy feeder that maps a DC network and integrated a human-machine interface (HMI) to control and visualise the system, which in future can be operated by ‘touch’ and also provides energy data. A new motor with a frequency converter for electrical speed adjustment was used. 

With the successful completion of the project, the five apprentices were able to show that the concept provided the desired improvements. 

Torben Müller, a trainer at Weidmüller, sees that such joint projects are gaining in importance, especially in times of a shortage of skilled workers: "The trainee project is an incredible opportunity for the trainees and the region to help shape the future development of energy supply. 

"It also shows how important it is for apprenticeship companies to work together to ensure the best possible development and training for apprentices." 

The key to a sustainable factory of the future
The apprentice project grew out of the DC-Industry2 research project, in which 39 partners from industry and research worked together to develop the basics for a direct current infrastructure in industry. 

Entire production halls can be powered by direct current (DC) from renewable energies and the benefits are considerable.

Some examples include:

1.  Renewable energies can be integrated more easily. The factory therefore becomes an energy producer and consumer at the same time
2.  Fewer conversions from AC to DC and vice versa reduce losses and energy consumption
3.  The feed-in power from the central supply grid is lower
4.  DC systems have higher availability because they continue to run from their own storage if the utility grid fails
5.  The converters required for energy-efficient drives are smaller (up to 25 percent less volume). Many components needed for alternating current can be eliminated altogether

For more information, please visit www.keb.co.uk.


Contact Details and Archive...

Print this page | E-mail this page