This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

More power, new design: Schaeffler develops next-generation bipolar plates for fuel cell drives

24 August 2023

Schaeffler is demonstrating its development capabilities in the field of hydrogen-powered mobility with a new generation of metallic bipolar plates for PEM fuel cells.

All fuel cell systems rely on bipolar plates, but the plates developed by Schaeffler feature a new design optimised for large-series production and leverage an innovative coating process for long fuel cell life. 

Moreover, stacks made using the new Schaeffler plates achieve a power density of around 20 percent greater than that of stacks made using previous-generation plates. 

“When it comes to drive systems for commercial vehicles, Schaeffler is also investing in hydrogen, especially for long-haul applications. 

“We are developing both individual components and complete subsystems for fuel cells and are gearing up for their full-scale industrialisation,” said Matthias Zink, CEO of Automotive Technologies at Schaeffler AG. 

At a purpose-built pilot production facility in Herzogenaurach, the company is now manufacturing the new plates in runs of up to several tens of thousands of units for use by international vehicle manufacturers in prototype and small-series production. 

The fully automated facility is part of Schaeffler’s Centre of Excellence for Hydrogen, a complex that also includes an extensive array of testing equipment. 

The facility has been designed so that it can also be used to manufacture large plates of the type used for electrolyzers. Schaeffler is thus ensuring both sustainable motion and the sustainable supply of green hydrogen. 

Thanks to its systems expertise, Schaeffler is also able to partner with customers to develop customised bipolar plates and components for fuel cell systems. 

Schaeffler is due to start production of bipolar plates under the name of Innoplate, a joint venture with Symbio, in Haguenau, France, at the start of 2024.

New plate design for increased power density
To the untrained eye, bipolar plates aren’t much to look at, being only about the size of an A4 envelope and weighing just 60 grammes. But they are core components of fuel cells, where they perform a number of vital functions, including providing channels both for the separation and distribution of the process gases and coolant and for the removal of the water resulting from the chemical reaction. 

“Schaeffler has developed an innovative design that makes optimal use of the plate’s surface area,” explained Dr. Jochen Schröder, Schaeffler’s Head of E-Mobility. 

“The finer and more precise the structures on the bipolar plate, the more efficient the plate is.” 
Schaeffler’s new plates enable a fuel cell stack power density of 4.6kW per litre of fuel cell volume (including end plates and compression hardware).

For vehicle applications, several hundred of these plates are layered on top of one another, each separated by a membrane electrode assembly (MEA), to form a stack. 

The plates account for up to 80 percent of the stack’s weight, and up to 65 percent of its volume. Stacks comprising up to 400 of these cell units have a total power output of up to 140kW – enough for light commercial vehicles. Heavy commercial vehicles up to 40 tonnes generally require two stacks. 

Industrial-scale production
Schaeffler’s new generation of bipolar plates is also designed from the ground up for industrialisation at large scale – an approach known as design for manufacturing (DFM). 

The aim is to achieve a level of cost-effectiveness and scalability of manufacturing sufficient for hydrogen-powered mobility to reach market breakthrough. 

In terms of production, the company is leveraging its many years of experience and expertise in metal stamping and forming, and has achieved the high level of precision needed to stamp the necessary ultra-fine structures on the surface of the plates, which have a thickness of only 50 to 100µm.

Another unique feature of the metallic bipolar plates made by Schaeffler is the coating system used. The purpose of coatings is to maintain a high level of electrical conductivity over the fuel cell’s entire service life. 

Schaeffler’s solution is “Enertect” – a family of high-performance coating systems developed specifically for bipolar plates. 
Depending on the customer’s requirements, the coatings can be engineered for maximum plate service life, minimum carbon footprint, or an optimised price-performance ratio. 

“Thanks to our capabilities in surface technology, we are able to offer each customer an application-specific coating solution. This means we can meet each customer’s requirements in terms of balancing cost, performance, and manufacturing-related CO2 emissions,” Jochen Schröder said. 

The coatings are applied using a specially adapted and fine-tuned version of the physical vapour deposition (PVD) process that Schaeffler has used successfully in the production of millions upon millions of highly stressed valvetrain components over the years. 

Finally, to make fuel cells gas- and watertight – vital from a quality and safety perspective – Schaeffler uses either injection-moulded or silk screen gaskets, or, depending on requirements, a special laser welding process developed in-house.


Contact Details and Archive...

Print this page | E-mail this page

MinitecBritish Encoder