This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

One part epoxy adhesive

07 November 2008

Master Bond has introduced a new single component, high performance epoxy adhesive called EP13. This compound requires no mixing and has an unlimited working life at room temperature. EP13 has excellent bond strength to similar and dissimilar substrates and superior dimensional stability. It has a service operating temperature range of -60°F to 450°F.

Master Bond EP13 is 100% reactive and does not contain any solvents or diluents. It can be applied to vertical surfaces without sagging or dripping. It cures at temperatures of 300°F to 350°F for 60-90 minutes. The higher the temperature, the faster the cure speed.

EP13 possesses high compressive strength and is readily machinable. Upon cure, EP13 readily obtains tensile shear strengths in excess of 3,500 psi. Resistance to a wide range of chemicals including fuels, acids, bases, oils and many solvents is exceptional. EP13 has low shrinkage upon cure and good electrical insulation properties. The standard colour is grey.

Master Bond EP13 is available in pint, quart, gallon and 5 gallon containers.


Contact Details and Archive...

Print this page | E-mail this page