This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Laser sensor offers 50kHz measuring speed and integrated controller with Ethernet interface

21 March 2011

Micro-Epsilon has introduced the optoNCDT 2300, a high-end, self-contained laser displacement sensor that requires no separate controller and which provides an extremely high measuring speed of up to 50kHz. And while competing sensors are claimed to offer similar measuring rates and resolution, the new optoNCDT 2300 is believed to be the only sensor that offers this measuring speed and an integral controller.

The optoNCDT 2300 uses Micro-Epsilon’s new A-RTSC (Advanced Real Time Surface Compensation) technology, which enables the sensor to automatically compensate in real time for difficult-to-measure surfaces. A-RTSC is a further development of Micro-Epsilon’s patented RTSC feature, which, when combined with high-speed software algorithms, dramatically reduces signal noise at high measurement speeds. When users need to measure against a shiny surface, for example, they ideally require a sensor that is able to automatically adjust the laser pulse duration (or laser on time) of the sensor to give them the optimum exposure time on the CCD for that particular surface. This, in turn, provides a higher accuracy measurement due to lower noise level on the output signal.
The optoNCDT 2300 laser triangulation sensor is available in five models with measuring ranges from 2mm up to 100mm. Resolution is up down to 0.1µm and linearity is down to ± 0.4µm. Data output is via Ethernet, RS422 or EtherCAT. The sensor is also extremely compact, measuring just 80mm by 75mm by 30mm.
Another added feature of the optoNCDT 2300 is that the sensor can now be configured remotely by using a web browser interface. This direct connection means the user can store parameters for a particular application, which can then be uploaded to one or multiple sensors, reducing set up time considerably.
In order to measure the thickness of transparent materials such as plastics, there is now no need for a second sensor unit to be installed. The optoNCDT 2300 records the first and second reflection from the target surface.
Micro-Epsilon will unveil the optoNCDT 2300 at Mtec 2011, NEC, Birmingham (6-7 April 2011, stand no. 1112).

Contact Details and Archive...

Print this page | E-mail this page