This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Slimline high power density 3U 4HP pluggable PSUs

28 August 2012

Verotec has introduced new 3U 4HP versions of the EPLAX VeroPower family of 19in subrack pluggable ac/dc switched mode power supplies to add further capability to its KM6 subrack and metal enclosure families.

At only 4HP (0.8 inches) wide and a standard 160mm deep, the new units are believed to be the slimmest available from any manufacturer, leaving the maximum possible space in the subrack for active system boards.

The units are available with power rails that suit the requirements of many embedded computing applications. The complete VeroPower range consists of pluggable PSUs with power ratings from 20 to 150W.

Output power levels of 20, 40 and 50W are available. 

All outputs are highly stable, with worst case line and load regulation a maximum of 0.1% and ripple typically less than 20mV peak-to-peak. Short circuit, output current limitation and output overvoltage protection are provided, and a power-fail signal is available on all 5V rails. 


Contact Details and Archive...

Print this page | E-mail this page

Minitec