This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Oh Crumbs! Solved at last, thanks to Mitsubishi

30 March 2012

A process that defied automation has finally been brought into the 21st century by systems integrator Clint Johnson of the wonderfully named Control Freaks Ltd, who has developed an all-Mitsubishi Electric solution.

He automated a machine for producing biscuit crumbs, breakfast cereal and snack foods, replacing a labour intensive manual process with one that guarantees consistent results.

“The basic process is to mix ingredients into uniform pellets and dry them,” explains Clint. “Sounds easy enough, but the devil is in the detail.”

Getting a consistent mix was difficult, and the liquid content needed to form pellets tended to cause the entire mix to clag up into one stodgy amorphous lump.

The system includes two horizontal spiral blade mixers. These are run backwards and forwards at different speeds to achieve a thorough mix.

“There is quite an art to the speed profiles we use, each product seems to require a unique pattern of fast and slow, forward and backwards. We have stored those profiles as recipes on a Mitsubishi FX3U PLC (programmable logic controller), which controls a number of 15 kW E700 and D700 variable speed drives on the mixer axes over an RS485 network.”

Feedback loops read the current in the motors to gauge the mix consistency.
The finished mix then flows through a series of holding hoppers and graters to form the desired pellet size. From here a dosing mechanism drops the pellets onto a conveyor and a series of levelling systems to even it out into a consistent layer before it moves into a dryer to form the final dry product.

“This was quite a complex job in itself, but there were two more related issues we had to address. The first was machine safety; operators would regularly have to access the machine for product changeovers, cleaning and maintenance. The second was that the machine had to be built as several separate subsystems then connected up without compromising operator safety.”

The solution was to define several discrete safety zones within the machine and connect them up with a control system that could determine whether to stop a single zone, several zones or the whole machine as appropriate.

“We ended up with two-hand controls, multiple emergency stop zones, interlocks on the access doors and trapped key mechanisms for assembling the various sections together,” recalls Clint. “In all there are about 30 safety switches across the machine that all needed to be interconnected into one coherent system.”

Mitsubishi Electric recommended the use of a single WS Safety Controller, part of its integrated safety range, with which it was straightforward to define an effective multi-level control network. This was networked with the FX plus an E1163 HMI using Ethernet, so that a full record of diagnostics was logged and instantly available for analysis.

“Handling the pelletised material was difficult, but it was really the safety implications that had floored previous attempts to automate the process. The capabilities of the WS Controller made this far easier than was previously possible; we could work through the various possible safety sequences in the same way as the production processes.”

Contact Details and Archive...

Print this page | E-mail this page

MinitecBritish Encoder