This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

In-row heat exchanger for cabinet cooling

02 November 2013

Pentair has extended its IT infrastructure portfolio with a new series of air/water heat exchangers. The Schroff Varistar SHX30 in-row heat exchanger has been specially designed for cooling cabinets with high thermal loads installed in an aisle containment.

The heat exchangers are added to the cabinets as a modular unit within the containment and are scaled to optimally match the planned packaging density. Redundancy is also implemented.

The basic unit is 300mm wide and can be supplied in different heights (2,000 or 2,200mm) and depths (1000 or 1,200mm). It is simple to configure to suit the appropriate requirements of the IT structure using individual components (side panels, plinth, covers, top cover, etc).

As for cooling modules, the customer can choose between units with one power supply unit or two (redundancy) as well as water connection points at the top or bottom. The cooling units are each fitted with six hot swap-capable fans and are regulated by internal and external temperature sensors.

For monitoring purposes, an Ethernet interface and a Web interface are provided. With a water inlet temperature of 12°C and an air exit temperature of 24°C the module delivers a cooling capacity of 3kW.

The Schroff Varistar SHX30 in-row heat exchangers are configured from matched, modular off-the-shelf components from the Varistar program using Schroff's ServicePlus option and can then be delivered within 10 working days.


Contact Details and Archive...

Print this page | E-mail this page