This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Optically clear, fast curing UV curable adhesive

04 May 2014

Specially formulated to optimise bond strength, Master Bond UV15-42C is a UV curable system for bonding, sealing and coating applications.

This smooth paste can be applied vertically without sagging. As an optically clear compound, it is suitable for use in the fibre-optic, optical, electronic, aerospace and speciality OEM industries.

This one part system bonds well to a wide variety of substrates including glass, metals, composites, rubbers and most plastics. Adhesion to acrylic and polycarbonates is exceptional.

UV15-42C also features a tensile strength of 5,000-6,000psi and a tensile modulus of 250,000-300,000psi at room temperature. Its toughness enables it to withstand thermal cycling as well as mechanical shock. UV15-42C is also resistant to chemicals such as water, oils, cleaning agents, acids and bases.

It cures readily in 10-30 seconds upon exposure to a UV light source emitting a 320-365 nm wavelength with an energy output of 20-40 milliwatts/cm2. UV15-42C is not oxygen inhibited and will cure in thicknesses up to ¼ inch. This electrically insulating, dimensionally stable system has low shrinkage upon curing.

UV15-42C is available for use in syringes and cartridges. It can also be purchased in ½ pint, pint and quart containers.


Contact Details and Archive...

Print this page | E-mail this page